Standard Tolerances

 

Non - Standard Washers
Inside Diameter Outside Diameter
Size Tolerance Size Tolerance
2.0mm - 5.9mm -0 / +0.2mm 3.0mm - 5.9mm +/- 0.1mm
6.0mm - 19.9mm -0 / +0.4mm 6.0mm - 19.9mm +/- 0.2mm
20.0mm - 50.9mm -0 / +0.5mm 20.0mm - 50.9mm +/- 0.3mm
51mm + -0 / +0.8mm 51mm + +/- 0.4mm

 

Linear Dimensions

 

Size Tolerance
6mm - 19.9mm +/- 0.25mm
20mm - 50.9mm +/- 0.4mm
51mm + +/- 0.5mm

 

Note: The above tolerances are achievable on most materials.Tighter tolerances may be achievable. However, this will depend on material, thickness, production method and type of tooling used. Softer materials such as rubbers and foams may exhibit a degree of concavity on cut edges.

 

Back to Enquiry Help Page